Need help?Do you have a question about the Chevin Research A Series and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | <0.05% at rated power |
|---|---|
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Signal to Noise Ratio | >100dB |
| Total Harmonic Distortion | <0.05% at rated power |
| Type | Power Amplifier |
| Frequency Response | 20Hz - 20kHz |
| Protection | Short circuit, thermal |
| Dimensions | 88mm x 482mm x 428mm |
| Weight | 12kg |
Lists included items and actions for missing or damaged parts.
Guidelines for airflow, rack mounting, and chassis support to ensure proper operation.
Information on factory voltage settings and the requirement for authorized dealer intervention.
Details on mains connection, power cable colors, and grounding for safe operation.
Requirements for power supply rating and the necessity of a grounded outlet for safety.
Instructions for managing neutral current balancing in three-phase electrical systems.
Explains input signal types, balancing, and specific wiring for different amplifier models.
Details on Speakon socket wiring and configurations for various amplifier models.
Table listing suggested speaker ratings per amplifier channel for different impedances.
Specifies correct total loudspeaker loading and minimum impedance for different amplifier series.
Details on A700V power handling for 70-volt systems and conventional speaker systems.
Notes on adjustable output limiting controls in specific models and consulting dealers.
Steps for turning on/off the amplifier and indicator light behavior.
Explains protection mechanisms like auto-mute, shorted output, and clipping indicators.
Information on fan operation and a warning about high sound levels.
Guidance on servicing by authorized dealers and handling unit damage or water ingress.
Details on connecting input signals for bridging specific amplifier models.
Wiring instructions for speaker output connectors when using mono bridge mode.
Guidance on gain controls, load impedance, and power output for bridged amplifiers.
Diagrams and labels for the front panel of the A500 amplifier.
Diagrams and labels for the front panel of the A700V amplifier.
Diagrams and labels for the front panels of A750, A1000, A1004, A1500, A2000, A3000 models.
Diagrams and labels for the front panels of the A4000 and A5003 amplifiers.
Diagrams and labels for the front panel of the Q6 amplifier, showing multiple channels.
Diagrams and labels for the front panels of Q1004 and QB1000/600 amplifiers.
Diagrams and labels for the front panel of the Q900 amplifier.
Diagrams and labels for the front panels of the A5000 and A6000 amplifiers.
Diagrams and labels for the back panel of the A500 amplifier.
Diagrams and labels for the back panel of the A700V amplifier.
Diagrams and labels for the back panels of A750, A1000, A1004, A1500, A2000, A3000 models.
Diagrams and labels for the back panel of the Q6 amplifier.
Diagrams and labels for the back panel of the QB1000/600 amplifier.
Diagrams and labels for the back panel of the Q1004 amplifier.
Diagrams and labels for the back panel of the A4000 amplifier.
Diagrams and labels for the back panel of the A5003 amplifier.
Diagrams and labels for the back panel of the Q900 amplifier.
Diagrams and labels for the back panels of the A5000 and A6000 amplifiers.
Technical specifications for A500, A1000, A1004, A1500, Q6, Q1004, QB1000/600 models.
Technical specifications for A2000, A3000, A4000, A5003, A6000 models.
Details on product guarantee, restrictions, service notification, and warranty card registration.
To Next Page
