To Next PageTo Next Page
Need help?Do you have a question about the Chevin Research A750 and is the answer not in the manual?
Details the items included in the amplifier carton, such as Speakon plugs and warranty card.
Provides guidance on amplifier placement for proper ventilation and rack mounting.
Covers earthing, power cable specifications, and safe mains supply connections.
Discusses neutral current balance and capacity for three-phase power systems.
Explains that inputs are electronically balanced and accept various sources.
Details wiring for balanced and unbalanced signals using XLR and other connectors.
Specifics on using block connectors for Line250 and Line500 model inputs.
Introduces the concept of bridging amplifier channels for increased power output.
Specific Speakon wiring for the A700v model, noting its permanent bridge mode.
Details Speakon wiring for A500, A750, A1000, A1004, A1500, A2000, A3000, A4000, A5003, Q900 models.
Wiring specifications for A5000 and A6000 models, noting their permanent bridge mode.
Speakon wiring for Q6 and Q1004 models, connecting parallel channels.
Wiring details for QB1000/600 model outputs, connecting parallel channels.
Instructions for connecting loads to connector blocks on Line250/500 models.
A table listing suggested speaker ratings in watts for various amplifier models.
Specifies the minimum system impedance for the A700v amplifier.
Defines minimum total impedance per channel for A500, A750, A1000, A1004, A1500, Q6, Q1004, QB1000/600.
Specifies minimum total impedance per channel for A2000, A3000, A4000, A5000, A5003, A6000, Q900.
Detailed wiring instructions for connecting sources to amplifier inputs for mono bridging.
Instructions for connecting speakers to amplifier outputs in mono bridge mode.
Guidance on setting gain controls for bridged channels to ensure equal load sharing.
Points to the rear page for mono bridge loading and power output values.
Step-by-step instructions for powering the amplifier on and off safely.
Describes various protection mechanisms like AutoMute, shorted output, and clipping.
Emphasizes referring servicing to authorized dealers and outlines safety precautions.
Illustration of the front panel controls and indicators for the A500 model.
Diagram showing the front panel components of the A700v amplifier.
Illustrations of the front panels for Q1004 and QB1000/600 models.
Diagram of the rear panel connections, including inputs, outputs, and fuse for the A500.
Illustration of the rear panel connections for the A700v amplifier.
Diagrams showing rear panel connections for Q1004 and QB1000/600 models.
Illustrations of front panel layouts for A750, A1000, A1004, A1500, A2000, A3000.
Diagrams of the front panels for A4000 and A5003 amplifier models.
Illustrations of the front panels for A5000 and A6000 amplifier models.
Diagrams of rear panel connections for A750, A1000, A1004, A1500, A2000, A3000.
Illustrations of rear panel connections for A4000 and A5003 models.
Diagrams of rear panel connections for A5000 and A6000 models.
Illustration of the front panel controls for the Q6 amplifier.
Diagram showing the front panel components of the Q900 amplifier.
Illustrations of the front panels for Line250 and Line500 line amplifiers.
Diagram of the rear panel connections for the Q6 amplifier.
Illustrations of rear panel connections for the Q900 amplifier.
Diagrams showing rear panel connections for Line250 and Line500 models.
Table detailing power, bandwidth, slew rate, gain, and THD for various models.
Table detailing signal-to-noise, crosstalk, impedance, sensitivity, power consumption, and dimensions.
Table listing minimum load and power output for models in mono bridge mode.
Details Chevin's 24-month warranty, restrictions, and return procedures.
General| Brand | Chevin Research |
|---|---|
| Model | A750 |
| Category | Amplifier |
| Language | English |
