To Next PageTo Next Page
Need help?Do you have a question about the Chevin Research Q900 and is the answer not in the manual?
Lists items included in the amplifier carton, detailing Speakon plugs per model.
Provides guidance on amplifier ventilation and rack mounting requirements.
Details wiring requirements for mains supply, including earthing and cable colours.
Explains XLR connector wiring for balanced audio signals.
Details wiring for unbalanced audio signals using XLR, jack, or phono connectors.
Describes input connections for Line250 and Line500 using block connectors.
Explains how to bridge amplifier channels for increased power output, excluding certain models.
Details Speakon socket wiring for the A700v model, noting permanent bridge mode.
Describes parallel-connected Speakon socket wiring for various models.
Details Speakon socket wiring for A5000/A6000, noting permanent bridge mode.
Explains Speakon socket wiring for Q6/Q1004, parallel connected in channel pairs.
Details Speakon socket wiring for QB1000/600, parallel connected in channel pairs.
Describes output connections for Line250/Line500 using connector blocks for 70V/100V lines.
Suggests speaker ratings per amplifier channel in watts for various models and impedances.
Lists correct impedance loadings for all models, with warnings for minimum loads.
Details the input wiring for mono bridging for specific amplifier models (A500, Q6, Q1004, A750-Q900).
Describes the speaker cable connections for mono bridging for specific amplifier models (A500-Q900, Q6, Q1004).
Explains setting gain controls for balanced load sharing in bridged mode.
Guides the user through the procedure for powering up the amplifier safely.
Instructs on the safe procedure for powering down the amplifier and disconnecting mains.
Explains various protection features like AutoMute, shorted output, low impedance, clipping, RF/DC, and cooling.
Provides critical safety warnings and procedures regarding internal maintenance and potential hazards.
Illustrates the front panel of the A500 amplifier, highlighting controls and indicators.
Shows the front panel layout for the A700v amplifier, including controls and indicators.
Displays the front panels for Q1004 and QB1000/600, detailing controls and indicators.
Details the rear panel connectors for the A500 amplifier, including input, output, and mains.
Shows the rear panel layout for the A700v, illustrating input, output, fuse, and mains connections.
Illustrates rear panels for Q1004 and QB1000/600, showing inputs, outputs, and fuses.
Depicts front panels and controls for these amplifier models.
Illustrates the front panels for A4000 and A5003 amplifiers, showing controls and indicators.
Shows front panels for A5000/A6000, focusing on power, signal, limiter indicators, and switches.
Details rear panel connections including input, output, link, and fuse for these models.
Illustrates rear panel connections for A4000/A5003, showing input, output, link, and fuse.
Shows rear panel connectivity for A5000/A6000, including inputs, outputs, and fuses.
Displays the front panel of the Q6 amplifier, highlighting controls and indicators.
Shows the front panel for the Q900 amplifier, detailing gain controls and switches.
Illustrates the front panel for Line250/Line500 stereo line amplifiers.
Details rear panel connections for the Q6 amplifier, including inputs and outputs.
Shows rear panel connectivity for the Q900 amplifier, including inputs and outputs.
Illustrates rear panel connector blocks for Line250/Line500 amplifiers.
Lists RMS power output into various impedances and the power bandwidth for each model.
Provides data on total harmonic distortion, signal-to-noise ratio, and crosstalk.
Details input impedance, common mode rejection, and input sensitivity for models.
Outlines protection features, power consumption, and voltage selection for amplifiers.
Lists rack unit size, physical dimensions, gross, and net weight for each amplifier.
Details power output, bandwidth, slew rate, gain, distortion, and noise for various models.
Lists input impedance, CMR, sensitivity, clipping, and output protection details.
Covers power consumption, AC input voltages, and physical dimensions/weight for models.
Provides mono bridge loading requirements and corresponding power output values for each model.
Details the 24-month warranty, restrictions, claim procedures, and registration process.
Lists Chevin Research contact details, website, and disclaimer regarding manual accuracy.
General| Brand | Chevin Research |
|---|---|
| Model | Q900 |
| Category | Amplifier |
| Language | English |
