To
replace batteries in the Keyless Entry transmitter:
1.
Insert a dime in the slot between' the covers
of
the
transmitter near the key ring hole. Remove the
bottom by twisting the dime.
2.
Remove and replace the batteries with two
Duracell@-type batteries (DL2016 or equivalent),
positive side down.
3.
Align the covers and snap them together.
4.
Check the operation
of
the transmitter.
Tailgate
You
can open
the
tailgate by pulling
up
on
the handle
while pulling the tailgate down.
When you put the tailgate back up, be sure it
latches securely.
Follow these steps if you want
to
remove the tailgate:
1.
Raise the tailgate slightly.
2.
Remove both retaining
cables.
To
remove each
cable, turn it
so
the end
faces the front. Then,
push forward
so
the
larger part
of
the hole
is
over the bolt. Pull the
end over the bolt,
2-6
I
To Next Page
Loading...
Need help?
General
