Chevrolet 2003 S10 Pickup User Manual

How to Add Fluid
Here’s how to add fluid. Refer to the Maintenance
Schedule to determine what kind of fluid to use. See
Part D: Recommended Fluids and Lubricants on
page
6-32.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add only enough
fluid to bring the fluid level up to the bottom of the
filler plug hole.
seated.
3. Install the filler plug. Be sure the plug is fully
Hydraulic Clutch
The hydraulic clutch linkage in your vehicle is
self-adjusting. The clutch master cylinder reservoir is
filled with hydraulic clutch fluid.
It is not necessary to regularly check clutch fluid unless
you suspect there is a leak in the system. Adding
fluid won’t correct a leak.
A fluid
loss in this system could indicate a problem.
Have the system inspected and repaired.
When to Check and What to Use
:I
Refer to the Maintenance Schedule to determine how
often you should check the fluid level in your clutch
master cylinder reservoir and for the proper fluid. See
Part B: Owner Checks and Services on page 6-25
and Part D: Recommended Fluids and Lubricants on
page
6-32.
5-26

Chevrolet 2003 S10 Pickup Specifications

General

Brand	Chevrolet
Model	2003 S10 Pickup
Category	Automobile
Language	English