When you sit in a center seating position, you have a
lap safety belt, which has no retractor. To make the belt
longer, tilt the latch plate and pull
it
along the belt.
To
make the belt shorter, pull its free end as shown
until the belt
is
snug.
Buckle, position and release it the same way as the lap
part of a lap-shoulder belt.
If
the belt isn’t long
enough, see
Safety Belt Extender on page
7-30.
Make sure the release button on the buckle
is
positioned
so
you would be able to unbuckle the safety belt
quickly
if
you ever had to.
1-25
To Next Page
Loading...
