Lap-Shoulder
Belt
The positions next to the windows have lap-shoulder
belts. Here’s how to wear one properly.
1.
Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
The shoulder belt may lock
if
you pull the belt
across you very quickly. If this happens, let the belt
go back slightly to unlock it. Then pull the belt
across you more slowly.
2.
Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
When the shoulder belt is pulled out
all
the way,
it will lock.
If
it does, let it go back all the way and
start again.
If
the belt is not long enough, see
Safety Belt
Extender on page
1-30.
Make sure the release button on the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had to.
1-28
To Next Page
Loading...
