Passenger Safety Belt
Reminder Light
If equipped, several seconds after the key is
turned to RUN or START, a chime will sound for
several seconds to remind the front passenger
to buckle their safety belt. This would only occur if
the passenger airbag is enabled. See Passenger
Sensing System on page 75 for more information.
The passenger safety belt light will also come
on and stay on for several seconds, then it
will flash for several more.
This chime and light will
be repeated if the
passenger remains
unbuckled and
the vehicle is in motion.
If the passenger’s safety belt is buckled, neither
the chime nor the light will come on.
Airbag Readiness Light
There is an airbag readiness light on the
instrument panel cluster, which shows the airbag
symbol. The system checks the airbag’s
electrical system for malfunctions. The light tells
you if there is an electrical problem. The
system check includes the airbag sensor, the
airbag modules, the wiring and the crash sensing
and diagnostic module. For more information
on the airbag system, see Airbag System
on page 66.
This light will come on
when you start your
vehicle, and it will flash
for a few seconds.
Then the light should go
out. This means the
system is ready.
163
To Next Page
Loading...
