License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding each of the
license plate lamps.
2. Turn and pull the license plate lamp toward
you through the opening.
3. Turn the bulb socket counterclockwise and pull
the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
Replacement Bulbs
Exterior Lamps Bulb Number
Back-Up Lamps 921
Center High-Mounted
Stoplamp (CHMSL)
912
Front Parking/Turn Signal Lamps 3157KX
Halogen Headlamps,
High/Low-Beam
9007 LL
License Plate Lamp and
Sidemarker
194
Stoplamp, Taillamp and Turn
Signal Lamps
3057KX
For replacement bulbs not listed here, contact
your dealer.
332
To Next Page
Loading...
