Chevrolet 2010 Cobalt User Manual

EQ (Equalization): Press this button to select preset
equalization settings.
To return to the manual mode, press EQ until Manual
displays or start to manually adjust the bass, midrange,
or treble by pressing
f.
Adjusting the Speakers (Balance/Fade)
Depending on which radio the vehicle has, the
Balance/Fade can be adjusted using
f or `.
To adjust balance or fade using
f:
1. Press
f until the speaker control tabs display.
2. Press the softkey under the desired tab,
or continue pressing
f to highlight the desired tab.
3. Turn
f to adjust the highlighted setting.
The highlighted setting can also be adjusted
by pressing either SEEK arrow.
On some radios,
\ FWD and s REV can also
be used to adjust the highlighted level.
To adjust balance or fade using
`:
1. Press
` until the speaker control labels display.
2. Continue pressing
` until the desired speaker
control label displays.
3. Turn
f to adjust the setting. The setting can also
be adjusted by pressing either SEEK arrow,
\ FWD, or s REV.
The radio may be capable of adjusting balance or fade
to the middle position by pressing the softkey below the
BAL or FADE tab for more than two seconds. The radio
beeps once and the level adjusts to the middle position.
The radio may also be capable of adjusting all tone
and speaker controls to the middle position by
pressing
f for more than two seconds until the radio
beeps once.
4-60
Information Provided by:

Chevrolet 2010 Cobalt Specifications

General

Brand	Chevrolet
Model	2010 Cobalt
Category	Automobile
Language	English