EasyManuals Logo

Chevrolet 2010 Cobalt User Manual

Chevrolet 2010 Cobalt
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #303 background imageLoading...
Page #303 background image
Checking Coolant
The vehicle must be on a level surface when checking
the coolant level.
The coolant surge tank is located in the engine
compartment on the driver's side of the vehicle.
See Engine Compartment Overview
on page 614
for more information on location.
Check to see if coolant is visible in the coolant surge
tank. If the coolant inside the coolant surge tank is
boiling, do not do anything else until it cools down.
If coolant is visible but the coolant level is not at or
above the COLD FILL mark, add a 50/50 mixture of
clean, drinkable water and DEX-COOL
®
coolant at the
coolant surge tank, but be sure the cooling system is
cool before this is done.
The coolant level should be at the COLD FILL line.
If it is not, you may have a leak in the cooling system.
6-31
Information Provided by:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chevrolet 2010 Cobalt and is the answer not in the manual?

Chevrolet 2010 Cobalt Specifications

General IconGeneral
BrandChevrolet
Model2010 Cobalt
CategoryAutomobile
LanguageEnglish

Related product manuals