Chevrolet Spark Owner Manual - 2013 - 1st - 5/2/12
5-24 Instruments and Controls
Menu 2
Press MENU until one of the
following items is displayed on the
upper and lower display areas. Use
w or x to scroll through the menu
items. Not all items are available on
every vehicle. The following is a list
of all possible menu items:
.
Remaining Oil Life
.
Units
.
Tire Learn
Remaining Oil Life
This display shows an estimate of
the oil's remaining useful life.
If 99
: % is displayed, that
means 99% of the current oil life
remains.
When the remaining oil life is low,
the Code 82 message will appear
on the display. The oil should be
changed as soon as possible. See
Engine Oil on page 10‑7. In addition
to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in the
Maintenance Schedule. See
Maintenance Schedule on
page 11‑2.
Remember, the oil life display must
be reset after each oil change. It will
not reset itself. Also, be careful not
to reset the oil life display
accidentally at any time other than
when the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system, see Engine
Oil Life System on page 10‑9.
Units
Press SET/CLR and move
w or x
to change units when UNIT is
displayed. Select 1, 2, or 3 for the
unit display. 1 is Imperial units, 2 is
US units, and 3 is metric units.
Press and hold SET/CLR to confirm
the setting. The number will flash.
This will change the displays on the
cluster and DIC to the type of
measurements selected.
Tire Learn
This display allows for matching of
the TPMS sensors. See Tire
Pressure Monitor System on
page 10‑42 and Tire Pressure
Monitor Operation on page 10‑43.
To Next Page
Loading...
