Chevrolet 2013 Spark User Manual

Black plate (2,1)
Chevrolet Spark Owner Manual - 2013 - 1st - 5/2/12
6-2 Lighting
Headlamp High/
Low-Beam Changer
The headlamps must be on for this
feature to work.
Push the turn signal lever away
from you to turn the high beams on.
The
3 light comes on in the
instrument cluster while the high
beams are on and the ignition is
turned to ON/RUN.
Pull the lever toward you to return to
low beams.
Flash-to-Pass
This feature is used to signal to the
vehicle ahead that you want
to pass.
Pull the turn signal lever toward you
until the high-beam headlamps
come on, then release the lever to
turn them off.
Daytime Running
Lamps (DRL)
Daytime Running Lamps (DRL) can
make it easier for others to see the
front of your vehicle during the day.
Fully functional daytime running
lamps are required on all vehicles
first sold in Canada.
The DRL system makes the
headlamps come on when the
following conditions are met:
.
The ignition is on.
.
The exterior lamp band is in
OFF or parking lamp position.
.
The parking brake is released.
This indicator light in the center
stack display comes on when the
DRL system is on.
When the DRL system is on, the
taillamps, sidemarker lamps,
parking lamps, and instrument panel
lights do not come on unless the
exterior lamp control is turned to the
parking lamp or headlamp position.
The DRL system turns off when one
of the following conditions is met:
.
The ignition is off.
.
The parking brake is on.
.
The high-beam headlamps
are on.
.
The low-beam headlamps
are on.
.
The flash-to-pass feature
is used.
The regular headlamp system
should be used when needed.

Chevrolet 2013 Spark Specifications

General

Brand	Chevrolet
Model	2013 Spark
Category	Automobile
Language	English