Reading Lamps
To
turn
either reading lamp on or
off,
press the
lamp lens.
Garage Door Opener Compartment
You can store your garage door opener in the rear
compartment of your overhead console, and operate
it
from this position.
To
install your garage door opener,
follow these instructions:
1.
Open the compartment by pressing the latch forward.
Remove the piece of self-sticking Velcro?
2.
Peel the protective backing from the Velcro
and press it firmly to the back of your garage
door opener.
3.
Line up the button
of
the garage door opener with
one of the four buttons
on
the compartment door.
Make sure the garage door opener button is facing
down and press the opener firmly into place.
4.
Once the opener is installed, use the black pegs
inside the compartment door to make sure the
lined area on the compartment door will contact
the control button on your garage door opener
when pressed.
2-68
To Next Page
Loading...
Need help?
General
