To Next PageTo Next Page
Need help?Do you have a question about the Chicago Electric 02957 and is the answer not in the manual?
General| Drilling capacity - Steel | 1/2 in. |
|---|---|
| Chuck type | SDS-Plus |
| Voltage | 120V |
| Drilling capacity - Concrete | 5/8 in |
| Max Drilling Capacity (Concrete) | 5/8 in |
Maintain a clean, dry workspace to prevent accidents and injuries.
Avoid operation if judgment is impaired by substances or medication.
Wear appropriate ANSI-approved safety gear for eye, respiratory, and hearing protection.
Ensure compliance with OSHA standards for industrial applications.
Inspect tool for damage before use; repair or replace worn parts immediately.
Use only identical replacement parts and intended accessories for servicing.
Operate the tool for its intended purpose; do not force or modify it.
Ensure work area is well-lit, clear, and free from hazards like flammables or moisture.
Select UL approved extension cords with the correct gauge and length.
Hold the tool firmly with both hands for maximum stability and control.
Always ensure the chuck key is removed from the tool before operation.
Turn off and unplug the tool before leaving it unattended.
Consult a doctor for regular check-ups if using vibrating tools extensively.
Always disconnect power before performing any inspection, maintenance, or cleaning.
