SKU 43585 For technical questions, please call 1-800-444-3353. Page 2
SPECIFICATIONS
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly,
operating and maintenance procedures, Parts List and Diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep the manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite
injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
4. USE EYE PROTECTION. Wear ANSI-approved safety impact eye goggles. ANSI-
approved safety impact goggles are available from Harbor Freight Tools.
5. DRESS SAFELY. Do not wear loose clothing or jewelry as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in the moving parts.
6. DO NOT OVERREACH. Keep proper footing and balance at all times.
ITEM DESCRIPTION
Net Weight
Electrical Requirements
Speed
Cord/Plug/Switch
Cord Length
Plug Type
Collet Size
Collet Wrenches
Router Shank
Depth Scale
15.8 Lbs.
120 VAC, 60 Hz
11 Amps
1-3/4 HP
Single Phase
20,000 RPM
UL/CE/CSA Approved
5 Ft.
2 Pole Polarized
1/2” with 3/8” & 1/4” Adapters
21mm & 23mm
1/2”
1” - 3” x 1/16”
230677
To Next Page
Loading...
