EasyManua.ls Logo

Chicago Electric 68221 - User Manual

Chicago Electric 68221
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
ELECTRIC
CHAIN SAW
SHARPENER
REV 14i
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2010 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Table of Contents

Other manuals for Chicago Electric 68221

Preview: User Manual
User Manual14 pages

Questions and Answers

  • C
    Christine MartinezAug 12, 2025
    What to do if my Chicago Electric 68221 will not start?
    • G
      Gregory PowellAug 12, 2025
      If your Chicago Electric Power Tool won't start, there are several potential causes. First, ensure the power cord is properly connected. Second, verify that the outlet has power; if not, check the circuit breaker, making sure the circuit's capacity is adequate for the tool and isn't overloaded. Third, if your tool has a thermal reset breaker, turn it off, let it cool, and then press the reset button. Finally, internal damage or wear may be the issue, in which case you should have a technician service the tool.
  • T
    Tiffany DixonAug 16, 2025
    Why is my Chicago Electric 68221 overheating?
    • T
      tmullenAug 16, 2025
      Overheating of your Chicago Electric Power Tool can occur for several reasons. Avoid forcing the machine to work too fast; allow it to operate at its own pace. Ensure cutting accessories are sharp, replacing them if needed. Clear any blockages from the motor housing vents, using compressed air while wearing ANSI-approved safety goggles and a NIOSH-approved dust mask/respirator. Lastly, eliminate the use of extension cords if possible, or use an extension cord with the proper diameter for its length and load.
  • S
    scott90Aug 20, 2025
    Why does my Chicago Electric 68221 performance decrease over time?
    • B
      Brian HuffmanAug 20, 2025
      Decreased performance in your Chicago Electric Power Tool over time can be due to a couple of factors. Check if the accessory is dull or damaged, and keep cutting accessories sharp, replacing them as needed. Also, worn or damaged carbon brushes may be the cause, and you should have a qualified technician replace them.
  • M
    moyerchristopherAug 23, 2025
    How to fix a slow operating Chicago Electric 68221 Power Tool?
    • L
      Laura SanchezAug 25, 2025
      If your Chicago Electric Power Tool is operating slowly, the extension cord may be too long or the wire size too small. Try eliminating the extension cord. If you need an extension cord, use one with the correct diameter for its length and load.
  • D
    David FoleyAug 27, 2025
    What causes excessive noise in my Chicago Electric Power Tool?
    • A
      Adriana RodriguezAug 27, 2025
      Excessive noise or rattling in your Chicago Electric Power Tool can be caused by internal damage or wear, such as with the carbon brushes or bearings. In this case, have a technician service the tool.
  • V
    Vickie BrownAug 31, 2025
    Why does the performance of my Chicago Electric 68221 Power Tool decrease over time?
    • A
      Amanda DavisAug 31, 2025
      If the performance of your Chicago Electric Power Tool decreases over time: * The accessory may be dull or damaged. Keep cutting accessories sharp and replace them as needed. * The carbon brushes may be worn or damaged. Have a qualified technician replace the brushes.
  • M
    Martin WagnerSep 3, 2025
    Why is my Chicago Electric 68221 making excessive noise?
    • B
      Barbara DaySep 4, 2025
      If your Chicago Electric Power Tool is making excessive noise or rattling sounds, it may be due to internal damage or wear, such as worn carbon brushes or bearings. Have a technician service the tool.
  • M
    michele34Sep 7, 2025
    How to fix a Chicago Electric 68221 that operates slowly?
    • K
      kthompsonSep 7, 2025
      If your Chicago Electric Power Tool operates slowly, it might be because the extension cord is too long or the wire size is too small. Try eliminating the extension cord. If you need one, use a shorter or heavier gauge cord.

Summary

Warning Symbols and Definitions

Important Safety Information

General Tool Safety Warnings

General safety rules for operating the tool, covering guards, keys, work area, and environment.

Grounding Instructions

110-120 VAC Double Insulated Tools: Tools with Two Prong Plugs

Explains how to use two-prong plugs with polarized outlets for safety.

Grinder Tool Safety Warnings

Specific safety precautions for operating the grinder tool, including eye protection and wheel use.

Specifications

Setup - Before Use

Mounting

Instructions on how to securely mount the sharpener onto a horizontal surface.

Attaching the Vise

Steps for correctly attaching the vise assembly to the sharpener base.

Functions

Operating Instructions

Tool Set Up

Initial setup procedures for the tool, including safety precautions before operating.

Installing the Grinding Wheel

Detailed steps for safely installing the grinding wheel onto the sharpener.

Workpiece and Work Area Set Up

General Operating Instructions

Sharpening the right-hand cutters

Step-by-step guide for sharpening the right-hand cutting edges of the saw chain.

Sharpening the left-hand cutters

Step-by-step guide for sharpening the left-hand cutting edges of the saw chain.

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication

Procedures for cleaning, maintaining, and lubricating the tool to ensure proper function.

Accessory Storage and Handling

Recommendations for storing and handling grinding accessories to prevent damage.

Troubleshooting

Parts List and Diagram

Parts List

An itemized list of all parts included with the chain saw sharpener.

Assembly Diagram

Limited 90 Day Warranty

Chicago Electric 68221 Specifications

General IconGeneral
TypeAngle Grinder
Disc Diameter4-1/2 in.
Voltage120 V
No Load Speed (RPM)11, 000 RPM
Spindle LockYes
Power SourceCorded Electric
Wheel Diameter4-1/2 in.
Arbor Size5/8 in.
No Load Speed11000 RPM
Spindle Thread5/8"-11 UNC

Related product manuals