Chicago Electric 68523 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
HIGH SPEED
3" ELECTRIC
CUT-OFF TOOL
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2011 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15b

Chicago Electric 68523 Specifications

General

Speed	11, 000 RPM
Spindle lock	Yes
Power Source	Corded Electric
Spindle Thread	5/8 in. - 11
Arbor Size	5/8 in.
Disc diameter	4.5 in
Voltage	120 V
No Load Speed	11000 RPM
Wheel Diameter	4.5 in

Summary

Owner's Manual & Safety Instructions

General Safety Warning

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Proper plugs, avoid grounded surfaces, rain/wet conditions, cord care, outdoor use, GFCI.

Personal Safety

Stay alert, use PPE, prevent unintentional starting.

Tool Use, Care, and Cutting Safety

Power Tool Handling and Operation

Cutting Tool Specific Safety

Precautions, accessory use, PPE for cutting operations.

Advanced Safety Procedures

Kickback Prevention

Understanding and preventing kickback forces.

Cutting Operation Safety

Accessory use, guard usage, wheel condition for cutting.

Vibration Safety

Grounding and Electrical Safety

Tools with Three Prong Plugs

Extension Cord Guidelines

Symbology and Instructions for Use

Initial Setup and Warnings

Read safety info, unplug for adjustments, check cutting wheel specs.

Installing 3 IN. Cutting Wheel

Wheel Installation Procedure

Use wrench to hold spindle, remove screw/flange, insert wheel, secure with bolt.

Operating the Cut-Off Tool

Work Area and Piece Preparation

Step-by-Step Operation

Proper grip, tool startup, cutting technique, stopping, and storage.

Maintenance and Servicing

Pre-Operation Inspection

Troubleshooting Common Issues