EasyManua.ls Logo

Chicago Electric 68696 - User Manual

Chicago Electric 68696
12 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
ITEM 68696
ROTARY
TOOL KIT
VARIABLE SPEED
REV 11l
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2011 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions

Table of Contents

Questions and Answers

  • V
    Vincent GarciaJul 30, 2025
    What to do if Chicago Electric Power Tool does not grind, sand or brush effectively?
    • T
      Tina StevensonJul 31, 2025
      If your Chicago Electric Power Tool isn't grinding, sanding, or brushing effectively, first ensure the disc accessory is of the correct dimension and the Collet Nut is tight. Check the tightness of the Collet Nut or threaded disc accessory on the Spindle. Also, check the condition and type of disc accessory, and use only the proper type in good condition for the material.
  • D
    Deanna MillerAug 5, 2025
    Why is my Chicago Electric 68696 overheating?
    • J
      John WilliamsAug 5, 2025
      Your Chicago Electric Power Tool may be overheating due to several reasons. You might be forcing the tool to work too fast, so allow it to work at its own pace. The motor housing vents could be blocked; wear ANSI-approved safety goggles and a NIOSH-approved dust mask/respirator while blowing dust out of the motor using compressed air. Also, a lengthy or small diameter extension cord may be straining the motor. Try eliminating the extension cord or using one with the proper diameter for its length and load.
  • F
    franciscochaneyAug 9, 2025
    What to do if my Chicago Electric 68696 Power Tool will not start?
    • S
      Stacey MuellerAug 10, 2025
      If your Chicago Electric Power Tool won't start, first check that the cord is plugged into a 120V outlet. Next, verify that there is power at the outlet. If the outlet is unpowered, turn off the tool and check the circuit breaker. If the breaker is tripped, ensure the circuit is the right capacity for the tool and has no other loads. If these steps don't resolve the issue, the tool may have internal damage or wear, and you should have a technician service it.
  • H
    Haley FrankAug 14, 2025
    Why does my Chicago Electric 68696 operate slowly?
    • H
      hansondavidAug 15, 2025
      If your Chicago Electric Power Tool is operating slowly, it could be due to a few reasons. First, check if the tool is set on a slow speed setting and increase it if necessary. Second, you might be applying excess pressure to the workpiece; decrease the pressure and allow the tool to do the work. Finally, the power might be reduced by a too lengthy or small diameter extension cord. Try eliminating the use of an extension cord, or if needed, use one with the proper diameter for its length and load.
  • S
    Steven ArmstrongAug 20, 2025
    Why does my Chicago Electric 68696 Power Tool make excessive noise?
    • P
      Pamela MooreAug 20, 2025
      Excessive noise or rattling in your Chicago Electric Power Tool is likely due to internal damage or wear, such as worn bearings. Have a technician service the tool to address these issues.
  • M
    moodytheodoreAug 25, 2025
    Why does the performance of my Chicago Electric 68696 Power Tool decrease over time?
    • B
      bryanyoungAug 25, 2025
      A decrease in performance of your Chicago Electric Power Tool over time is likely due to worn internal components. To resolve this, have a qualified technician service the tool.

Summary

Owners Manual & Safety Instructions

Save This Manual

Keep this manual for future reference regarding safety, assembly, operation, and maintenance.

Critical Safety Advisory

Read material before using product to avoid potential injury or death. Save this manual.

Specifications

Important SAFETY Information

General Power Tool Safety Warnings

Read all safety warnings and instructions to prevent electric shock, fire, or serious injury.

General Power Tool Safety Warnings

Electrical Safety Precautions

Ensure proper grounding, avoid wet conditions, and do not abuse the power cord.

Personal Safety Guidelines

Stay alert, use safety equipment, prevent unintentional starting, and dress properly.

Power Tool Use and Care

Use the correct tool, do not force it, maintain it, and store it safely.

Service and Maintenance

Have power tools serviced by qualified personnel using identical replacement parts.

Safety Warnings for Specific Operations

Accessory Safety

Use correct, undamaged accessories, inspect them, and test at max speed.

Operational Safety Practices

Secure work, avoid snagging, keep vents clear, and use clamps.

Chemical Exposure Warnings

Be aware of chemicals in dust (lead, silica, arsenic) and use ventilation/PPE.

Vibration Safety

Reducing Vibration-Related Injury

Reduce exposure by medical check-ups, avoiding smoking, and using proper techniques.

Grounding and Electrical Safety

Extension Cord Guidelines

Use correct gauge cords, check condition, protect from damage, and use outdoors.

Instructions For Putting Into Use

Tool Set-Up Procedures

Assemble attachments, insert/remove accessories, and tighten securely.

Work Area Preparation

Designate a clean, well-lit area, secure workpieces, and plan for sparks.

Operating Instructions

Grip firmly, do not force the tool, and let it do the work.

Setting the Speed

Maintenance And Servicing

Cleaning & Maintenance

Inspect tool before use, wipe clean after use, and blow out dust periodically.

Accessory Storage and Handling

Handle accessories carefully and store in a dry area, away from children.

Troubleshooting

Accessories Parts List

Main Unit - Parts List & Assembly Diagram

Limited 90 Day Warranty

Chicago Electric 68696 Specifications

General IconGeneral
BrandChicago Electric
Model68696
CategoryPower Tool
LanguageEnglish

Related product manuals