To Next Page
A
Angela RichardsJul 30, 2025
Why Chicago Electric 47840 will not start?
- CConnor BeanJul 30, 2025
There are several potential reasons why your Chicago Electric Saw might not be starting: 1. The power cord may not be properly connected. Ensure the cord is securely plugged in. 2. There might be no power at the outlet. Check the outlet for power. If it's unpowered, turn off the tool and inspect the circuit breaker. If the breaker is tripped, confirm the circuit's capacity is suitable for the tool and that no other devices are overloading the circuit. 3. There could be internal damage or wear to components like carbon brushes or the trigger. If this is the case, have a qualified technician service the tool.
General
