Chicago Electric 91811 User Manual

130 AMP TIG / 90 AMP
ARC WELDER
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 MISSION OAKS BLVD., CAMARILLO, CA 93011
VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM
Copyright © 2004 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
91811
®

Chicago Electric 91811 Specifications

General

Output Current	90A
Wire Size	0.030 in. - 0.035 in.
Welding Processes	Flux Core (FCAW)
Input Voltage	120V
Duty Cycle	20% @ 90A

Summary

General Safety Rules

Electrical Safety

Avoid contact with grounded surfaces and wet conditions. Ensure proper grounding and cord care.

Personal Safety

Stay alert, dress properly, avoid accidental starting, and remove keys.

Specific Safety Rules for This Product

Maintain a Safe Working Environment

Avoid Unintentional Starting

Unplug Before Performing Maintenance

Never Leave the Welder Unattended

Prevent Eye Injury and Burns

Wear ANSI approved eye protection, welding helmet, and protective clothing.

Prevent Accidental Fires

Remove combustibles, protect openings, and be aware of fire hazards.

Remove or Make Safe Combustible Materials

Enclose the Work Area

Avoid Overexposure to Fumes and Gases

Use ventilation or respirators to avoid breathing toxic welding fumes and gases.

Inhalation Hazard

Welding fumes can cause cancer and other serious diseases. Use safety precautions.

Grounding

Extension Cords

Assembly Instructions

Operating Instructions

TIG Welding

Arc Welding

Inspection, Maintenance, and Cleaning