Chicago Electric MIG-100 91124 User Manual

®
MIG-100 WELDERMIG-100 WELDER
MIG-100 WELDERMIG-100 WELDER
MIG-100 WELDER
WITH THERMAL OVERLOADWITH THERMAL OVERLOAD
WITH THERMAL OVERLOADWITH THERMAL OVERLOAD
WITH THERMAL OVERLOAD
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
91124
REVISED 12/04

Chicago Electric MIG-100 91124 Specifications

General

Brand	Chicago Electric
Model	MIG-100 91124
Category	Welding System
Language	English

Summary

Save This Manual

Safety Warnings and Precautions

Work Area Safety

Covers clean area, conditions, children, and tool storage.

Operational Safety

Covers not forcing the tool and using it as intended.

Continued Safety Precautions

Proper Tool Usage and Maintenance

Covers using the right tool, dressing properly, eye/ear protection, maintenance.

Safe Operation Practices

Covers avoiding overreaching, unintentional start, alertness, checking parts.

Electrical Safety and Prohibitions

Covers shock, power disconnect, unqualified operation, and part replacement.

Extension Cord and Arc Welding Precautions

Extension Cord Usage

Use proper size and type extension cord for tool.

Welding Hazards and Warnings

Covers chemicals, fumes, gases, electrical shock, and California Prop 65.

Unpacking

Assembly

Operation

Maintenance

Replacing the Wire Reel

Steps for replacing the wire reel when it is used up.

Welder Parts List

Welder Assembly Drawing

Welder Assembly Photographs

Wiring Schematic