Need help?Do you have a question about the Chicago Pneumatic CP 9361 Air Scribe and is the answer not in the manual?
General| Model | CP 9361 |
|---|---|
| Part Number | CP9361 |
| Type | Air Scribe |
| Operating Pressure | 6.3 bar |
| Air Inlet Thread Size | 1/4" NPT |
| Min. Hose Size | 3/8" |
| Vibration Uncertainty | 1.5 m/s² |
| Free Speed | 22000 rpm |
Defines the intended purpose and limitations of the product.
Details the necessary air pressure and quality for proper tool operation.
Guidance on lubrication and technical specifications for the tool.
Instructions on how to safely start and operate the air hammer, plus safety warnings.
Instructions for swapping the marking stylus with a chisel attachment.
Guidance on properly sharpening the stylus for optimal performance.
Instructions for heat treating and hardening chisel blanks.
Important safety notes and procedures for taking apart and reassembling the tool.
Troubleshooting common issues and repair procedures for the air hammer.
To Next Page
