Chicago Pneumatic CP734H Series User Manual

CP734H Series
Impact Wrench
1/2" Sq. Dr. Model "K"
Operator’s Manual
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions before performing any such task.
Chicago Pneumatic

Chicago Pneumatic CP734H Series Specifications

General

Drive Size	1/2 inch
Maximum Torque	500 ft-lbs
Impacts per Minute	1, 200 BPM
Air Inlet Thread Size	1/4 inch NPT
Minimum Hose Size	3/8 inch
Model	CP734H

Summary

Critical Safety Warning

Chicago Pneumatic Contact Information

Global Headquarters Contact

Main contact details for Chicago Pneumatic headquarters.

International Office Contacts

Contact information for regional offices worldwide.

Operating Instructions

Air Supply Requirements

Proper air pressure and connection guidelines for tool operation.

Lubrication Guide

Recommended lubrication methods and intervals for the tool.

Tool Operation and Power Adjustment

How to use the impact wrench and adjust its output power.

Maintenance Schedule

Recommended maintenance tasks and frequency for the tool.

EC Declaration of Conformity

Comprehensive Safety Guidelines

Safety Information Resources

Sources for additional safety information and standards.

Air Supply and Hose Hazards

Risks related to compressed air supply and hose management.

Entanglement and Entrapment Hazards

Dangers from rotating parts, clothing, and hair entanglement.

Projectile and Eye Protection Hazards

Risks from flying debris and mandatory eye protection.

Workplace Environmental Hazards

Hazards in the workplace including slips, noise, and vibration.

Tool Specific Safety Topics

Important safety considerations unique to this tool.