Chicago Pneumatic CP734HK User Manual (English)

Need help?

Do you have a question about the Chicago Pneumatic CP734HK and is the answer not in the manual?

Chicago Pneumatic CP734HK Specifications

General

Brand	Chicago Pneumatic
Model	CP734HK
Category	Impact Driver
Language	English

Summary

Safety Warning

General Warning

Read and understand instructions before use to reduce risk of injury.

Contact Information

Headquarters Location United States

Chicago Pneumatic Tool Company, Automotive Division, 1800 Overview Drive, Rock Hill, SC 29730 USA.

Australia Contact

Atlas Copco Tools Australia, 3 Bessemer Street, Blacktown, Australia.

Belgique Contact

Chicago Pneumatic Rep. Office, Avenue Sluysmans 10-4030 Liege Belgium.

Brasil Contact

Chicago Pneumatic Brasil, Av. Mascote 159 V. Sta. Catarina 04363-000 Sao Paulo/SP • Brasil.

Canada Contact

Chicago Pneumatic Tool Co., Automotive Division, 1800 Overview Drive, Rock Hill, SC 29730.

France Contact

Espace Lumière, Bâtiment S, 57, Boulevard de la République 78403 Chatou Cédex. France.

Germany Contact

Desoutter GMBH, Paul-Friedlander-Str 65203 Wiesbaden Germany.

India Contact

Chicago Pneumatic Sales, Chemtex House, First Floor Main Street, Hiranadani Gardens Powai, Mumbai 400076, India.

Italy Contact

Desoutter Italiana S.R.L., Viale Della Repubblica, 65 20035 Lisson (Milano).

Mexico Contact

Chicago Pneumatic Tool Company Mexico, San Francisco #223 Valle Dorado, Tlalnepantla C.P. 54020. Mexico.

South Africa Contact

Chicago Pneumatic Tool Company, S.A., 20 Anvil Road PO Box 105 Isando 1600, Transvaal South Africa.

Southeast Asia Contact

Chicago Pneumatic Tool Company Regional Office P.O. Box 1516 Unit 2103 - Citimark 28 Yuen Shun Circuit Shatin, New Territories, Hong Kong.

Spain Contact

Desoutter S.A., C. Serrano, 120 28006 Madrid • Spain.

Sweden Contact

Chicago Pneumatic Distributor Markets Sickla Industriväg 7 S-131 34 Nacka Sweden.

United Kingdom Contact

Chicago Pneumatic Tool Company, Ltd., P.O. Box 241 Eaton Road Hemel Hempstead, Herts HP2 7DR England.

Instruction Manual

Air Supply Requirements

Supply tool with 90 psig (6.2 bar) of clean, dry air. Higher pressure drastically reduces tool life.

Lubrication

Use an air line lubricator with SAE #10 oil, adjusted to two (2) drops per minute.

Operation

This impact wrench is equipped with a regulator to enable adjustment of output power.

Maintenance

Disassemble and inspect air motor and impacting clutch every three (3) months if the tool is used every day.

EC Declaration of Conformity

Statement declaring product conformity with Council Directive requirements.

Technical Data

1/2" Sq. Dr. Air pressure 90 psi (6.2 bar) Harmonized Standards Applied EN292.

Noise & Vibration Declaration

Sound pressure level 93 dB(A), uncertainty 3 dB(A), in accordance with ISO 15744-2002.

Safety Instructions

Air Supply and Connection Hazards

Air under pressure can cause severe injury. Always shut off air supply, drain hose and disconnect tool.

Entanglement Hazards

Keep away from rotating drive. Do not wear jewelry or loose clothing.

Projectile Hazards

Always wear impact-resistant eye and face protection when involved with or near the operation.

Workplace Hazards

Slip/Trip/Fall is a major cause of serious injury or death. Beware of excess hose.

Additional Safety Topics

This tool and its accessories must not be modified. Not for use in explosive atmospheres.

Manufacturer's Limited Warranty

United States Warranty

Products guaranteed free from defects in material and workmanship for one year from date of purchase.

Lists service centers in Alabama, Arizona, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Michigan, Minnesota, Mississippi, Missouri, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon.