Chicago Pneumatic CP789R Series - User Manual

Operator’s Manual
CP789R Series
Air Drill
3/8“ & 1/2“ - Model A & B
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948740, before performing any such task.

Summary

Air Diagram

Technical Data

Noise and Vibration Statement

Details on declared noise and vibration values obtained by laboratory testing.

Machine Type and Usage

Product Purpose

Product is designed for drilling or reaming holes; for professional use only.

Tool Operation Guide

Connecting and Starting

Instructions for connecting the device, fixing accessories, and starting/stopping the tool.

Lubrication Requirements

Recommended Lubricant

Details on SAE #10 turbine oil and specific CP PROTECTO-LUBE part numbers.

Maintenance and Repair

Service Guidelines

Follow environmental regulations; maintenance by qualified personnel; disconnect power before service.

Equipment Disposal

Handling Disused Equipment

Dispose of equipment following national legislation; take non-functioning devices out of operation.

Declaration of Conformity

EU Machinery Directive Compliance

Statement of conformity with EU Machinery Directive 2006/42/EC and harmonised standard EN ISO 11148-6:2012.

Chicago Pneumatic CP789R Series Specifications