Chicago Pneumatic CP9285C User Manual

Operator’s Manual
CP9285C CP9286C CP9287C CP9288C
Pneumatic Drill
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948740, before performing any such task.
8940175193 - Rev.01 - 26/09/2017
CP9789C CP9790C CP9791C CP9792C

Chicago Pneumatic CP9285C Specifications

General

Air Consumption	17 cfm
Free Speed	500 rpm
Chuck Size	1/2 in
Weight	3.75 lb
Length	8.5 in
Power	0.5 hp
Horsepower	0.5 hp
Vibration Level	2.5 m/s²
Type	Pistol Drill
Air Inlet	1/4 inch NPT
Air Inlet Size	1/4 in

Summary

Technical Data and Specifications

Machine Types and Usage

Details the intended use of the pneumatic drill for drilling and reaming holes only. For professional use.

Tool Operation Guide

Instructions for connecting the tool, fixing accessories, operating in reverse, starting, stopping, and using a side handle.

Lubrication Procedures

Guidance on lubricating the motor with air line lubricator or oil, and clutch lubrication with grease.

Maintenance and Servicing

Instructions for safe maintenance, using qualified personnel, disconnecting power, periodic inspection, and recommended service kits.

Equipment Disposal Guidelines

Information on following local legislation for the safe disposal of equipment and taking faulty devices out of operation.

EU Declaration of Conformity

Statement confirming the product's conformity with EU Machinery Directive requirements.