Chicago Pneumatic CP879C User Manual

Operator’s Manual
CP879C & CP887C
Pneumatic Drill
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948740, before performing any such task.
8940175195 - Rev.01 - 26/09/2017

Chicago Pneumatic CP879C Specifications

General

Free Speed	2200 rpm
Power	0.5 hp
Air Inlet Thread Size	1/4 inch NPT
Air Inlet Size	1/4 inch
Min. Hose Size	3/8 inch

Summary

Assembly and Disassembly Procedures

Assembly

Illustrated guide for assembling the pneumatic drill components.

Disassembly

Illustrated guide for disassembling the pneumatic drill components.

Operational and Maintenance Details

Technical Specifications

Presents key technical specifications for the CP879C & CP887C pneumatic drills.

Machine Type and Operation

Defines machine types and provides instructions for operation, including reverse rotation.

Lubrication

Details motor and clutch lubrication requirements for optimal tool performance.

Maintenance and Disposal

Guidelines for tool maintenance, repair, and proper disposal according to regulations.