To Next PageTo Next Page
Need help?Do you have a question about the CHICAGO PUMP HBB and is the answer not in the manual?
Covers pump location selection, foundation requirements, anchor bolts, setting, and alignment for optimal pump performance.
Emphasizes the necessity of priming the pump and suction pipe completely before starting, especially for non-submerged suction.
Provides detailed lubrication requirements for bearings, couplings, flexible shafting, and stuffing boxes before operation.
Describes the components and lubrication requirements for mechanical seals, including clear water and closed loop systems.
Lists essential checks before initial pump start-up, including alignment, lubrication, rotation, and valve positions.
Details how to verify correct pump rotation and the procedure for changing motor lead connections if necessary.
Provides a step-by-step guide for the initial start-up sequence, including valve operation and post-start checks.
Lists common causes and checks for situations where the pump delivers no liquid, such as priming or valve issues.
Identifies potential reasons for low liquid delivery, including air leaks, low speed, or mechanical defects.
Explains factors contributing to high power usage, such as speed, specific gravity, or mechanical problems like binding.
Covers troubleshooting for pumps that lose prime, focusing on suction line leaks, high suction lift, or insufficient NPSH.
General| Brand | CHICAGO PUMP |
|---|---|
| Model | HBB |
| Category | Water Pump |
| Language | English |
