To Next PageTo Next Page
Need help?Do you have a question about the CHICAGO PUMP VOS and is the answer not in the manual?
General| Brand | CHICAGO PUMP |
|---|---|
| Model | VOS |
| Category | Water Pump |
| Language | English |
Explains the manual's intent and the importance of following its instructions for proper pump service.
Highlights critical safety warnings and conditions for operating Chicago Pump equipment.
Guides on how to inspect equipment upon arrival and report any damages or missing parts.
Provides instructions for protecting pumps during storage to prevent damage and corrosion.
Details the procedure for requesting and ordering replacement parts for Chicago Pump products.
Explains how to read and record essential pump information from its nameplate.
Lists essential tools needed for dismantling and repairing Chicago Pump dry pit pumps.
Specifies the types of grease and oil suitable for lubricating pump components.
Identifies the appropriate cleaning solvent for pump parts, emphasizing safety.
Lists recommended spare parts to be kept on hand for maintenance and repair.
Covers factors for selecting an ideal pump location and preparing a suitable foundation.
Details the correct method for installing anchor bolts and setting the pump on its foundation.
Explains procedures for achieving proper vertical and horizontal shaft alignment.
Outlines the process for applying non-shrink grout to secure the pump base plate.
Provides guidance on connecting suction and discharge piping, including air leak prevention.
Describes the installation and alignment procedures for Sure-Flex elastomeric couplings.
Details the installation and alignment of universal joint and intermediate industrial shafting.
Explains the critical process of filling the pump and suction pipe with liquid before starting.
Guides on lubricating bearings, couplings, shafting, and stuffing boxes before initial operation.
Lists essential checks and steps required before initiating pump operation.
Provides a step-by-step guide for the first operation of the pump unit.
Outlines how to operate the pump within its specified capacity and maintenance checks.
Covers procedures for power failure, submergence, mechanical failures, and normal stopping.
Details steps for safely shutting down the pump for prolonged periods.
Lists potential causes and solutions when the pump fails to deliver any liquid.
Addresses problems causing reduced liquid output and how to resolve them.
Identifies reasons for high power usage and methods to correct them.
Explains why a pump might lose prime and how to fix it.
Describes how to clean the pump using removable handhole covers.
Provides detailed instructions for taking apart the pump assembly for repair.
Details the steps for reassembling the pump after repairs or parts replacement.
