Page 8 For technical questions, please call 1-800-444-3353. SKU 98871
SAFETY SERVICEBASIC WELDING WELDING TIPSSETUP
SPECIFICATIONS
Power Input
120 V~, 24 A (peak), 1-phase
Connect to at least 20 A dedicated circuit
Welding Output
DCEN
MIN: 63 ~ 68 A
MAX: 79 ~ 90 A
HOT TIP welder
Capacity
22 gauge (0.03”) to 3/16” (0.19”) mild steel only
Not for welding aluminum or stainless steel
Duty Cycle
25% at MAX setting
45% at MIN setting
(See explanation on page 16)
Open Circuit Voltage 31
KVA 3.6
Wire Speed 101 – 342 IPM
Cable Sizes
Ground: 6 AWG, 6’
Gun: 8 AWG, 6’
Power: 3-wire, 14 AWG
Welder Tips / Wire Size Installed tip will accept .030” to .035” FLUX CORE wire
Wire Spool Capacity 4” diameter / 2 lb. spool
Internal Fuse
2 A 250 V Tube fuse (see page 27)
Accessories
Spare Welder Tip (for .030” to .035” wire)
Welding Face Shield
Combination Wire Brush / Chipping Hammer
UNPACKING
When unpacking, make sure that the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.
To Next Page
Loading...
