40 41
How to Use Infant Car Seat Adapter
When using an Infant Car Seat
with the Lower Modular
position IN. Make sure the Grip
Bar is removed before placing the
Infant Car Seat into the adapter
(See step 35), or use the Lower
Modular Position OUT.
28A. With the Infant Car Seat
Adapter attached, place the
Chicco infant car seat into the
adapter. The infant car seat can
only be attached in a
Parent-Facing position. Make
sure infant car seat clicks into the
Infant Car Seat Adapter on both
sides.
Pull up on the infant car seat;
make sure it is secured to Stroller
Frame (28B). If the infant car seat
is not secured see Step 28 to make
sure the Infant Car Seat Adapter is
assembled and attached correctly.
28B
28A
1
CLICK!
CLIC!
CHECK!
!
VERIFICAR!
2
!
“CLICK!”
Parent-Facing Infant Seat in
Lower Modular Position IN
WARNING
ONLY USE a Chicco infant car seat with this product. Always make sure
child is properly harnessed in the car seat. Only use this product to transport
infants that are within the size and weight limitations of the infant car seat.
Refer to your Chicco infant car seat owner's manual for additional warnings
and use instructions before using this product.
How to Use Infant Car Seat Adapter
To Next Page
Loading...
