Chicco FastLock 360 - Attach: Slide Onto Table Top; Attach: Secure Locking Clamps; Attach: Check Table Apron Clearance; Attach: Final Security Check

8 9
5. Check to make sure there is not a
gap between the front of the Hook-
On Chair and the edge of the table
top.
To secure the Hook-On Chair to
the table, squeeze the ratchet button
until the clamp bar meets the
underside of the table. Repeat for the
other side. Check to make sure that
the arms on the table top are flat and
that the Hook-On Chair is secure.
How to Attach the Hook-on Chair
5
WARNING
Pull/Push on hook-on chair to make sure it is firmly attached to table.
How to Attach the Hook-on Chair
4A. Slide the Hook-On Chair onto the
table top. Make sure the Upper Arms
are on top of the table and the Lower
Locking Arms are folded downwards
and below the table top.
4B. Rotate both Locking Clamps up,
as shown, until they click into an
upright position. Check to make sure
both Locking Clamps are fully rotated
up.
If the underside of your table has an
apron, make sure the Lower Locking
Arms are completely over it before
securing.
4A
4B
Apron
Gap