100
101
SECURING YOUR CHILD
SECURING YOUR CHILD
Remove Shoulder Pads, undo the chest clip. Lift up on the Head Rest pad
and unsnap the pad on both sides. Pull Grip Pads out from behind Head
Rest Pad and lay them flat against the Head Rest Pad. Re-snap both snap
buttons.
Undo the hook and loop straps on the Grip Pads and place Harness Strap
into Grip Pad and attach hook and loop straps over harness. Make sure
harness is not twisted and repeat for the other side.
SECURING CHILD WITH HARNESS SECURING CHILD WITH HARNESS
Grip Pads are for Lap Belt Only Install (page 72) with a Forward-Facing
child weighing 25 to 65 lbs (11.4 to 29.5 kg). DO NOT use Grip Pads for
any other installation.
Special Instructions for Grip Pads when using Fit360 with Lap Belt Only
installation in Forward-Facing mode.
To Next Page