To Next PageTo Next Page
Need help?Do you have a question about the Chicco MyFit Harness+Booster and is the answer not in the manual?
General| Product Type | Harness+Booster Car Seat |
|---|---|
| Machine Washable Cover | Yes |
| Weight Capacity | Harness Mode: 25-65 lbs; Booster Mode: 40-100 lbs |
| Harness Mode | Yes |
| Booster Mode | Yes |
| Installation | LATCH and Vehicle Seat Belt |
| Recline Positions | 4 |
| Headrest Positions | 9 |
| Safety Features | DuoGuard side-impact protection, steel-reinforced frame |
| Cup Holders | 2 |
Details weight, height, and age criteria for using Harness Mode.
Details weight, height, and behavior criteria for Booster Mode.
Ensuring child meets requirements, proper configuration, and safe location.
Emphasizes following instructions to prevent serious injury or death.
Warnings related to child fit, usage restrictions, and installation.
Warnings related to child fit, safety, and proper use in Booster Mode.
Instructions regarding airbags and correct seat belt positioning.
Guidance on back seat use, forward-facing, and avoiding folded seats.
Rules for using UAS, seat belts, and anchor limits in Harness Mode.
Instructions on checking straps, age limits, and accessory use.
Guidance on replacing after a crash and prohibition of modifications.
Practices for restraining occupants, securing objects, and sun protection.
Information on contacting Chicco for help and other support resources.
Illustrations and labels for various parts of the child restraint.
Guidance on properly storing UAS and tether components when not in use.
Criteria for child eligibility and harness mode usage.
Criteria for child eligibility and booster mode usage.
Step-by-step instructions for adjusting the crotch strap.
Instructions for adjusting the seat recline position.
Step-by-step instructions for adjusting the headrest height.
Procedure for attaching and removing the cup holders.
Warning against installing with active frontal airbags.
Guidance on safest seating and compatible vehicle types.
Lists seat belt types that must NOT be used in Harness Mode.
Lists seat belt types that must NOT be used in Booster Mode.
Explanation of UAS and warning about anchor spacing.
Details on tether anchors, their function, and typical locations.
Steps for preparing and placing the restraint for harness installation.
Ensuring parallel placement and checking vehicle headrest interference.
Steps for ensuring a level surface and checking installation lines.
Overview of different installation methods for Harness Mode.
Warnings about UAS anchor use with heavy children and inflatable belts.
Detailed steps for connecting UAS to vehicle anchors and tightening.
Procedure for installing the restraint using a vehicle lap-shoulder belt.
Procedure for installing the restraint using only the vehicle lap belt.
Steps for buckling and adjusting the child's harness.
Checklists for snugness, strap flatness, height, and chest clip position.
Steps to prepare the seat for booster mode, including strap adjustments.
Detailed steps for installing the booster seat in a vehicle.
Instructions for installing the booster seat using UAS.
Steps for seating the child and routing the vehicle belt correctly.
Steps to switch the seat from Booster Mode back to Harness Mode.
Checklist for ensuring proper child securing in Booster Mode.
Guidelines and restrictions for using the restraint on an aircraft.
Warnings about cleaning agents and procedures for soft goods.
