Chicco LITE WAY - Page 16

16
17
LITE WAY
IMPORTANT WARNING
IMPORTANT- KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
WARNING: BEFORE USE, REMOVE AND DISPOSE
OF ALL PLASTIC BAGS AND PACKAGING
MATERIALS AND KEEP THEM OUT OF REACH OF
CHILDREN.
WARNINGS
• WARNING: before assembly, check that the
product and all of its components have not
been damaged during transportation. Should
any part be damaged do not use and keep out
of reach of children.
• WARNING: Never leave your child unattended.
• WARNING: Ensure that all the locking devices
are engaged before use.
• WARNING: To avoid injury ensure that your
child is kept away when unfolding and folding
this product.
• WARNING: Do not let your child play with this
product.
• WARNING: Always use the restraint system.
• WARNING: This product is not suitable for run-
ning or skating.
• The stroller is intended for use with children
aged between 0 and 36 months, up to 15 kg of
weighting
• It is recommended that the backrest should be
used in its most reclined position for children
from birth to 6 months of age.
• The parking device shall be engaged when pla-
cing and removing the children.
• Do not overload the storage basket. Maximum
weight 3 kg.
• Any load attached to the handle and/or on the
backrest and/or the sides of the vehicle will af-
fect the stability of vehicle.
• Do not carry more than one child at a time.
• Do not use accessories, replacement parts, or
any component not supplied or approved by the
manufacturer/distributor.
• The product must be assembled by an adult.
• The use of the crotch strap and safety harness is
necessary to guarantee the safety of your child.
Always use the safety harness together with the
crotch strap.
• Ensure that during these operations the move-
able parts of the stroller do not come into con-
tact with your child.
• Do not let other children play unattended close
to the stroller or climb on it.
• Never leave the stroller on a sloped surface with
a child onboard, even with the brakes applied.
• When not in use, the stroller must be kept away
from the reach of children.
• This product must only be pushed by an adult.
• Ensure that the person using the stroller knows
how to use it safely.
• Always apply the brakes whenever the stroller is
stationary.
• To avoid the risk of strangulation, keep objects
tted with strings or laces out of reach of
children.
• Do not use the stroller on stairs or elevators: it
could cause the loss of control of the stroller.
• Pay special attention when maneuvering the
stroller up or down pavements or a step.
• If the stroller is left exposed to direct sun light
for a long time, allow it to cool before placing
your child in it. Prolonged exposure to direct
sunlight may cause the fabric to fade.
• Do not use the product if some of its parts are
broken, torn or missing.
• Prevent the stroller from coming into contact with
salt water. It may cause the formation of rust.
• Do not use the stroller on the beach.
CLEANING AND MAINTENANCE
The cleaning and maintenance of this product must be carried
out on a regular basis by the user. The cleaning and maintenance
of the stroller must only be carried out by an adult.
CLEANING
The cover can be removed (please refer to the section “How to
Remove the Fabric Cover”).
Please refer to the care labels for instructions on how to clean
the fabric parts. Below are the cleaning symbols and their
meanings:
Wash by hand in cold water.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.
Periodically wipe clean plastic parts with a soft damp cloth.
Always dry the metal parts to prevent the formation of rust if
the stroller has come into contact with water.
30° C
MAINTENANCE
Lubricate the moving parts only if necessary, with a light
application of a silicone based lubricant. Regularly check the
condition of the wheels and, keep them clean of dust and sand.
To avoid friction that may prevent the correct operation of the
stroller, ensure that all the movable plastic parts placed along
the metal frame are clean of dust, dirt or sand. Keep the stroller
in a dry place.
GENERAL INSTRUCTIONS
HOW TO ASSEMBLE THE FRONT WHEELS
1.Assemble the front wheel, inserting it into the appropriate joint.
A click will be heard, indicating that it is locked correctly into
position (diag. 1). Repeat this operation with the other wheel.
WARNING: Before use, ensure that the wheels are safely
locked into position.
HOW TO OPEN THE STROLLER
WARNING: When opening the stroller, ensure that your child,
or other children, are at a safe distance.
Ensure that during these operations, the movable parts of the
stroller do not come into contact with your child.
2. Release the closing device and push the front part of the
stroller forward (diag. 2).
3. Push the rear primary locking mechanism downward with
your foot (diag. 3). Ensure that the stroller is open and locked
in the correct position.
WARNING: Before use, ensure that the stroller is locked in the
open position, by checking that the locking mechanism, at the
rear of the stroller, is effectively locked.
HOW TO USE THE SAFETY HARNESS
This stroller has a ve-point safety harness featuring two
shoulder straps, two adjustment holes, a waist strap and a
crotch strap with buckle.
After removal of the safety harness (e.g. for washing), ensure
that the harness is reassembled correctly using the anchorage
points. The harness must be re adjusted.
WARNING: When using the safety harness with children from
birth up to approximately 6 months of age, it is necessary to
rst t the shoulder straps through the two adjustment holes.
4. If necessary, adjust the height of the shoulder straps, inserting
them into the adjustment hole, as shown in diagram 4. After
sitting your child in the stroller, fasten the safety harness, rst
inserting the two prongs into the hole located on the shoulder
straps (diag. 4A and 4B) and then into the buckle of the crotch
strap (diag. 4C). Adjust the length of the straps, ensuring that
they adhere to the child’s shoulders and body correctly. To
unfasten the waist strap, press and pull the side prongs.
WARNING: Children should be harnessed in at all times. To ensure
your child’s safety, it is necessary to always use the safety harness.
5. For extra safety, “D” rings are provided for the attachment of
a separate safety harness approved to BS6684. They are located
inside the seat on the left and right, see diagram 5 above.
HOW TO ADJUST THE BACKREST
The backrest can be adjusted to 5 positions.
6. Fit the two fabric panels to the rear tubes by fastening the
two press studs, as shown in diagram 6.
7. To adjust the inclination of the backrest, press the button
located on the backrest. Release the button to lock the backrest
in the nearest position (diag. 7).
8. To raise the backrest to the desired position, simply push it in
an upward direction (diag. 8).
WARNING: The child’s weight can make these operations more
difcult.
EN