20 21
Assembling Changing Table
13A. Insert the Changing Table Frame
Sides into the openings on the back of
the Changing Pad and slide up.
13B. Attach the Changing Table Frame
End to the Changing Table Frame
Sides as shown making sure it clicks
into place.
“CLICK!”
13A
13B
Assembling Changing Table
12
12. Slide the end of the Changing
Table Frame Side into the groove of
the Changing Table Frame End until it
clicks into place. Make sure the tab is
on the inside when assembling.
Repeat for the other Changing Table
Frame Side as shown.
Do NOT Snap the other end onto the
changer frame. Move to step 13 to
install softgoods before finishing the
changer frame assembly.
Tab
“CLICK!”
To Next Page
Loading...
