Chicco Lullaby Primo - Assembling Changing Table; Assembling Changing Table Frame

24 25
17
17. Remove the Changing Table by
pushing in on the release buttons and
lifting up.
Assembling Changing Table
Assembling Changing Table
16
16. IMPORTANT: The Changing Table
can only be attached to one end of
the playard. Locate the changing
table receptacles on the side of the
playard. Assemble the Changing
Table by lining up the corners of the
changing table frame with the corners
of the playard. Press down until the
changing table latches into the
playard receptacles. Pull up on
Changing Table to check for
attachment. Never use the changer
on another surface or playard.
“CLICK!”