6
INSTRUCTIONS
FOR USE
ONE4EVER STROLLER FASTIN
ADAPTORS
IMPORTANT READ
CAREFULLY AND
KEEP FOR FUTURE
REFERENCE.
WARNING: BEFORE USE, REMOVE AND
DISPOSE OF ALL PLASTIC BAGS AND
PACKAGING MATERIALS AND KEEP THEM
OUT OF REACH OF CHILDREN.
WARNINGS
• WARNING: The adap-
tors can only be used
with the One4Ever
stroller.
• WARNING: Only CHICCO
KORY I-SIZE car seats can
be installed on these
adaptors.
• WARNING: Before use,
check correct fixing
of the adaptors to the
frame of the stroller.
• WARNING: Before use,
make sure that the child
car seat or carry cot is
correctly fitted on the
adaptors by pulling up
on the car seat or carry
cot.
• Keep adaptors out of
reach of children when
they are not in use.
ADVICE FOR CLEANING AND
MAINTENANCE
Cleaning and maintenance operations must
only be carried out by an adult.
CLEANING
After possible contact with water, dry the metal
parts in order to avoid the formation of rust. Do
not use solvents or abrasive products to clean
the plastic components. After use, keep the
adaptor in a dry place.
INSTALLING AND USING ADAPTORS WITH
THE CHICCO KORY I-SIZE CAR SEAT
Position the adaptors on the frame of the
stroller by inserting the plastic component
into the joint on the stroller (Fig. 1). Once the
two adaptors have been properly mounted on
either side, the stroller is ready to be attached
to the child car seat (Fig. 1A).
2. To install the CHICCO KORY i-Size car seat,
insert the car seat's lateral connectors into
the previously mounted adaptors (Fig. 2-2A).
WARNING: The car seat should be fixed only
and exclusively forward-facing. To remove the
CHICCO KORY i-Size Car Seat, press the but-
tons under the handle on both sides and pull
upwards on the handle (Fig. 2B).
DISASSEMBLING THE ADAPTORS
The stroller can be closed with the adaptors
installed on the frame.
3. To remove the adaptors press the button
and pull up (Fig. 3).
WARRANTY
The product is guaranteed against any lack of
conformity under normal use as specified in
To Next Page
Loading...
