EasyManuals Logo

Chicco OneFit ClearTex All-in-One User Manual

Chicco OneFit ClearTex All-in-One
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PMS 2747 and PMS 186
WARNING: Avoid serious injury or death to your child. Never
use your OneFit Child Restraint without the softgoods in place. You
must read and understand the Softgoods Removal instructions and
the instructions in the User Guide. If you do not understand these
instructions, DO NOT attempt to remove the softgoods, STOP
and call Chicco at 1-877-424-4226.
INSTRUCTIONS:
OneFit Softgoods Removal/Installation
IMPORTANT: Please also refer to the instructions that came with your product.
1
SS0034E_01
SOFTGOODS REMOVAL:
Completely loosen Harness Straps by pressing
Harness Release Button on the front of the Child Restraint
and pulling out on both of the Harness Straps. Then
unbuckle the Chest Clip and Harness Buckle.
1
Remove BOTH of the Cup Holders by pressing the
orange button located on the bottom edge and lifting up.
5
Remove the Crotch Strap Pad by pulling the Crotch
Strap Pad up and off the Harness Buckle, as shown. Also
remove the Shoulder Pads.
2
Pull both Headrest Insert flaps forward to remove
the Insert tongues from the side pockets on the Headrest.
3
Remove the Newborn Positioner by pulling the
Harness Straps out through the side openings on the pad
and threading the Harness Buckle down through the slot
in the pad.
4
Raise the Headrest to the highest position.
6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chicco OneFit ClearTex All-in-One and is the answer not in the manual?

Chicco OneFit ClearTex All-in-One Specifications

General IconGeneral
Product TypeAll-in-One Car Seat
Weight Limit4-100 lbs
Rear-Facing Weight Capacity4-40 lbs
Forward-Facing Weight Capacity25-65 lbs
Booster Weight Capacity40-100 lbs
Height LimitUp to 57 inches
Harness Type5-point harness
Fabric TypeClearTex fabric
Installation MethodLATCH, Seat Belt
Safety StandardsFMVSS 213 certified
Additional Featurescup holder, machine washable cover

Related product manuals