6 7
1C
2. Attach the Rear Wheel (B) to the
Stroller Frame by lining up and
inserting the Rear Wheel Post into
the opening on the frame, as shown.
Repeat for the other side.
Make sure both Wheels are secure by
pulling out on Wheel assemblies.
2
“CLICK!”
“CLICK!”
1C. With the Stroller handle pulled
away from the seat as shown in 1B, lift
in a sweeping back and up motion
until the Stroller Frame clicks into
place.
1D. Place your foot on the rear axle
and pull back on the Stroller handle
to align the handle with the frame.
Check to ensure that the Stroller
Frame is locked in the open position.
WARNING
Check that the wheels are fitted correctly.
1D
How to Assemble Stroller How to Assemble Stroller
To Next Page
Loading...
