What to do if my Chigo CUA-60CR1 has high pressure protection?
If your Chigo Air Conditioner is showing a high pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo Air Conditioner has low pressure protection?
If your Chigo Air Conditioner is showing a low pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo CUA-60CR1 Air Conditioner outdoor unit has over-current protection?
If your Chigo Air Conditioner's outdoor unit is experiencing over-current protection, assess the outdoor unit for electrical issues and repair as required.
What to do if my Chigo CUA-60CR1 has outdoor protection?
If your Chigo Air Conditioner is experiencing outdoor protection issues, check the outdoor unit for proper operation and reset it if necessary.
What to do if my Chigo CUA-60CR1 outdoor unit exhaust temperature is over-high?
If your Chigo Air Conditioner's outdoor unit exhaust temperature is too high, inspect the outdoor unit for airflow issues and correct any airflow obstructions.
What to do if my Chigo CUA-60CR1 Air Conditioner has three-phase electricity phase sequence failure?
If your Chigo Air Conditioner reports a three-phase electricity phase sequence failure, check the phase sequence of the electrical supply.
What to do if my Chigo Air Conditioner has ambient temperature sensor (T1) failure?
If your Chigo Air Conditioner indicates an ambient temperature sensor (T1) failure, check the ambient temperature sensor and replace it if necessary.
What to do if my Chigo CUA-60CR1 has evaporator pipe temperature sensor (T2) failure?
If your Chigo Air Conditioner shows an evaporator pipe temperature sensor (T2) failure, check the evaporator pipe temperature sensor and replace it if necessary.
What to do if my Chigo CUA-60CR1 Air Conditioner has condenser pipe temperature sensor (T3) failure?
If your Chigo Air Conditioner displays a condenser pipe temperature sensor (T3) failure, check the condenser pipe temperature sensor and replace it if necessary.
What to do if my Chigo CUA-60CR1 Air Conditioner has indoor unit EEPROM failure?
If your Chigo Air Conditioner indicates an indoor unit EEPROM failure, replace the indoor unit EEPROM.
General| Brand | Chigo |
|---|---|
| Model | CUA-60CR1 |
| Category | Air Conditioner |
| Language | English |
Explains the model naming conventions for indoor and outdoor units.
Lists all available indoor and outdoor unit model names with specifications.
Provides visual representations of the indoor and outdoor unit designs.
Details the key features and benefits of the product series.
Covers specifications, dimensions, wiring, and troubleshooting for cassette indoor units.
Covers specifications, dimensions, wiring, and troubleshooting for duct indoor units.
Covers specifications, dimensions, wiring, and troubleshooting for floor and ceiling indoor units.
Lists detailed technical specifications for all outdoor unit models.
Provides dimensional drawings and measurements for outdoor units.
Illustrates the electrical connections for various outdoor unit models.
Shows a breakdown of outdoor unit components with part numbers.
Lists outdoor unit fault codes and their descriptions for diagnosis.
Details crucial steps and warnings for safe and proper installation.
Explains the process of drying refrigerant pipes and checking for leaks.
Covers guidelines for drainpipe installation, gradient, and selection.
Specifies requirements for insulating refrigerant pipes and connections.
Outlines the procedure for verifying the system's functionality after installation.
Explains the functions and icons of the wireless remote controller.
Details the use and installation of the wired controller.
To Next Page
