What to do if my Chigo CCA-48HR1 Air Conditioner has condenser pipe temperature sensor (T3) failure?
If your Chigo Air Conditioner displays a condenser pipe temperature sensor (T3) failure, check the condenser pipe temperature sensor and replace it if necessary.
What to do if the remote control signal is not transmitted even when the ON/OFF button of Chigo CCA-48HR1 Air Conditioner is pushed?
If the remote control signal of your Chigo Air Conditioner is not transmitted even when the ON/OFF button is pushed, it could be due to exhausted batteries in the remote controller. Replace the batteries, as the remote control won't transmit a signal if the power supply is off.
Why TEMP. Indicator does not come on Chigo CCA-48HR1?
The temperature indicator on your Chigo Air Conditioner won't appear if the MODE is set to 'FAN ONLY'. You cannot set the temperature during fan-only operation.
Why does the indication on the display disappears after a lapse of time on Chigo Air Conditioner?
If the indication on the display of your Chigo Air Conditioner disappears after some time, it may be because the timer operation has ended when the OFF TIMER is indicated on the display. The air conditioner stops when the set time has elapsed.
What to do if my Chigo CCA-48HR1 Air Conditioner has indoor unit EEPROM failure?
If your Chigo Air Conditioner indicates an indoor unit EEPROM failure, replace the indoor unit EEPROM.
What to do if my Chigo CCA-48HR1 Air Conditioner outdoor unit has over-current protection?
If your Chigo Air Conditioner's outdoor unit is experiencing over-current protection, assess the outdoor unit for electrical issues and repair as required.
What to do if my Chigo CCA-48HR1 has high pressure protection?
If your Chigo Air Conditioner is showing a high pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo CCA-48HR1 has low pressure protection?
If your Chigo Air Conditioner is showing a low pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What does it mean when the running and timer lights are flashing on my Chigo Air Conditioner?
If your Chigo Air Conditioner is experiencing an indoor unit EEPROM failure, the running light and timer light will flash.
What does it mean when the defrost and warning lights are flashing on my Chigo Air Conditioner?
If your Chigo Air Conditioner is under outdoor protection, the defrost light and warning light will be flashing.
Explains model name coding system for units.
Lists unit model names and illustrates external appearance.
Details key features applicable to the product series.
Covers technical details for cassette indoor units.
Provides information on duct type indoor units.
Details features for floor and ceiling indoor units.
Lists detailed specifications for outdoor units.
Provides dimensional drawings and installation space for outdoor units.
Illustrates wiring diagrams and presents electrical characteristics for outdoor units.
Specifies temperature ranges and sound levels for outdoor units.
Shows unit part views and provides fault finding guidance.
Offers essential precautions for safe installation and pipe connection guidance.
Details procedures for vacuum drying pipes and calculating refrigerant charge.
Covers guidelines for drainpipe installation and pipe insulation.
Outlines the procedure for conducting test operations and verifying system functionality.
Explains the functions and icons of the wireless remote controller.
Provides instructions for using and installing the wired controller.
General| Cooling Capacity | 48000 BTU/h |
|---|---|
| Heating Capacity | 48000 BTU/h |
| Energy Efficiency Ratio (EER) | 2.8 |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 18-43°C |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor Unit) | 58 dB |
| Operating Temperature (Heating) | -7°C to 24°C |
To Next Page
