What does it mean if the running, defrost, and timer lights are flashing on my Chigo Air Conditioner?
If your Chigo Air Conditioner is under high pressure protection, you'll notice that the running light, defrost light, timer light are flashing.
What does it mean when the defrost, timer, and warning lights are flashing on my Chigo CCA-48HR1 Air Conditioner?
If your Chigo Air Conditioner indicates low pressure protection, the defrost light, timer light, and warning light will flash.
Why is the running, timer, and warning light flashing on my Chigo CCA-48HR1?
If the outdoor unit exhaust temperature of your Chigo Air Conditioner is too high, the running light, timer light, and warning light will flash.
Why the ON TIMER indicators go off after a lapse of certain time on Chigo Air Conditioner?
If the ON TIMER indicators go off after a certain time on your Chigo Air Conditioner, it means the timer operation has started. When the set time to start the air conditioner is reached, it will automatically turn on, and the indicator will turn off.
Why does the indication on the display disappears after a lapse of time on Chigo Air Conditioner?
If the indication on the display of your Chigo Air Conditioner disappears after some time, it may be because the timer operation has ended when the OFF TIMER is indicated on the display. The air conditioner stops when the set time has elapsed.
Why TEMP. Indicator does not come on Chigo CCA-48HR1?
The temperature indicator on your Chigo Air Conditioner won't appear if the MODE is set to 'FAN ONLY'. You cannot set the temperature during fan-only operation.
What to do if the remote control signal is not transmitted even when the ON/OFF button of Chigo CCA-48HR1 Air Conditioner is pushed?
If the remote control signal of your Chigo Air Conditioner is not transmitted even when the ON/OFF button is pushed, it could be due to exhausted batteries in the remote controller. Replace the batteries, as the remote control won't transmit a signal if the power supply is off.
General| Cooling Capacity | 48000 BTU/h |
|---|---|
| Heating Capacity | 48000 BTU/h |
| Energy Efficiency Ratio (EER) | 2.8 |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 18-43°C |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor Unit) | 58 dB |
| Operating Temperature (Heating) | -7°C to 24°C |
Explains model name coding system for units.
Lists unit model names and illustrates external appearance.
Details key features applicable to the product series.
Covers technical details for cassette indoor units.
Provides information on duct type indoor units.
Details features for floor and ceiling indoor units.
Lists detailed specifications for outdoor units.
Provides dimensional drawings and installation space for outdoor units.
Illustrates wiring diagrams and presents electrical characteristics for outdoor units.
Specifies temperature ranges and sound levels for outdoor units.
Shows unit part views and provides fault finding guidance.
Offers essential precautions for safe installation and pipe connection guidance.
Details procedures for vacuum drying pipes and calculating refrigerant charge.
Covers guidelines for drainpipe installation and pipe insulation.
Outlines the procedure for conducting test operations and verifying system functionality.
Explains the functions and icons of the wireless remote controller.
Provides instructions for using and installing the wired controller.
To Next Page
