What to do if my Chigo CTB-36CR1 Air Conditioner has high pressure protection?
If your Chigo Air Conditioner is showing a high pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo CTB-36CR1 Air Conditioner has low pressure protection?
If your Chigo Air Conditioner is showing a low pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo Air Conditioner outdoor unit has over-current protection?
If your Chigo Air Conditioner's outdoor unit is experiencing over-current protection, assess the outdoor unit for electrical issues and repair as required.
What to do if my Chigo Air Conditioner has outdoor protection?
If your Chigo Air Conditioner is experiencing outdoor protection issues, check the outdoor unit for proper operation and reset it if necessary.
What to do if my Chigo CTB-36CR1 Air Conditioner outdoor unit exhaust temperature is over-high?
If your Chigo Air Conditioner's outdoor unit exhaust temperature is too high, inspect the outdoor unit for airflow issues and correct any airflow obstructions.
What to do if my Chigo CTB-36CR1 has three-phase electricity phase sequence failure?
If your Chigo Air Conditioner reports a three-phase electricity phase sequence failure, check the phase sequence of the electrical supply.
What to do if my Chigo CTB-36CR1 has ambient temperature sensor (T1) failure?
If your Chigo Air Conditioner indicates an ambient temperature sensor (T1) failure, check the ambient temperature sensor and replace it if necessary.
What to do if my Chigo Air Conditioner has evaporator pipe temperature sensor (T2) failure?
If your Chigo Air Conditioner shows an evaporator pipe temperature sensor (T2) failure, check the evaporator pipe temperature sensor and replace it if necessary.
What to do if my Chigo CTB-36CR1 has condenser pipe temperature sensor (T3) failure?
If your Chigo Air Conditioner displays a condenser pipe temperature sensor (T3) failure, check the condenser pipe temperature sensor and replace it if necessary.
What to do if my Chigo CTB-36CR1 has indoor unit EEPROM failure?
If your Chigo Air Conditioner indicates an indoor unit EEPROM failure, replace the indoor unit EEPROM.
Explains the coding system used for product model names.
Details specifications, features, and diagrams for cassette type indoor units.
Covers features, specifications, diagrams, and troubleshooting for ducted units.
Details features, specifications, diagrams, and troubleshooting for floor/ceiling units.
Important safety and procedural steps before installing the unit.
Procedures for dehydrating the system and checking for leaks.
Steps to perform after installation to ensure proper functioning.
General| Cooling Capacity | 36000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Type | Split Air Conditioner |
| Air Flow | 1200 m3/h |
| Operating Temperature (Cooling) | 18-43°C |
To Next Page
