What to do if my Chigo CCA-24HR1 has condenser pipe temperature sensor (T3) failure?
If your Chigo Air Conditioner displays a condenser pipe temperature sensor (T3) failure, check the condenser pipe temperature sensor and replace it if necessary.
What to do if the remote control signal is not transmitted even when the ON/OFF button of Chigo CCA-24HR1 is pushed?
If the remote control signal of your Chigo Air Conditioner is not transmitted even when the ON/OFF button is pushed, it could be due to exhausted batteries in the remote controller. Replace the batteries, as the remote control won't transmit a signal if the power supply is off.
Why TEMP. Indicator does not come on Chigo Air Conditioner?
The temperature indicator on your Chigo Air Conditioner won't appear if the MODE is set to 'FAN ONLY'. You cannot set the temperature during fan-only operation.
Why does the indication on the display disappears after a lapse of time on Chigo CCA-24HR1 Air Conditioner?
If the indication on the display of your Chigo Air Conditioner disappears after some time, it may be because the timer operation has ended when the OFF TIMER is indicated on the display. The air conditioner stops when the set time has elapsed.
What to do if my Chigo CCA-24HR1 has indoor unit EEPROM failure?
If your Chigo Air Conditioner indicates an indoor unit EEPROM failure, replace the indoor unit EEPROM.
What to do if my Chigo CCA-24HR1 Air Conditioner outdoor unit has over-current protection?
If your Chigo Air Conditioner's outdoor unit is experiencing over-current protection, assess the outdoor unit for electrical issues and repair as required.
What to do if my Chigo CCA-24HR1 has high pressure protection?
If your Chigo Air Conditioner is showing a high pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo Air Conditioner has low pressure protection?
If your Chigo Air Conditioner is showing a low pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What does it mean when the running and timer lights are flashing on my Chigo CCA-24HR1?
If your Chigo Air Conditioner is experiencing an indoor unit EEPROM failure, the running light and timer light will flash.
What does it mean when the defrost and warning lights are flashing on my Chigo Air Conditioner?
If your Chigo Air Conditioner is under outdoor protection, the defrost light and warning light will be flashing.
Explains the coding system for model names of indoor and outdoor units.
Illustrates the electrical connections for various outdoor unit models.
Lists fault codes and their corresponding failure descriptions for outdoor units.
Important safety precautions and procedures for pipe connection.
Procedures for drying refrigerant pipes and checking for leaks.
Guidelines for calculating and adding refrigerant based on pipe length.
Steps and checks required for verifying proper operation after installation.
General| Refrigerant | R22 |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Air Flow | 1000 m3/h |
| Type | Split System |
| Operating Temperature | 43 °C |
| Cooling Capacity | 24000 BTU/h |
To Next Page
