14
To remove infant carrier from stroller (cont.)
4. Attach armrest fabric cover by:
• Sliding the fabric cover towards the bumper bar and press
in to attach the second and third plastic pegs (located
underneath the fabric cover).
• Holding the fabric cover rmly and press in to attach the
rst plastic peg. This will allow the fabric cover to be attach
to the armrest completely.
WARNING: To avoid injury, ensure both armrest’s plastic slot covers
and fabric covers are securely attached before placing baby in
stroller.
To attach
rst plastic peg
To attach
third plastic peg
To attach second
plastic peg
Assembly / Operating Instructions
3. Close both armrest plastic slot covers. Ensure they are locked
into position by pushing it down into place.
To Next Page
