05
Assembly / Operating Instructions
Unfolding the stroller
1. Release the folding lock as high-
lighted in the image right.
2. Lift handle and seat apart until the
frame clicks and locks on both
sides.
3. Ensure the stroller is locked on
both sides before using.
Front / rear swivel wheels assembly
1. Make sure the swivel lock is unlocked by pushing down to
lowest point.
2. The wheel should be assembled with the swivel housing facing
upwards as shown in image.
Unlock
3. Push forward and hold the wheel fastening clip. Whilst holding
this clip, push the wheel into position on the metal shaft, release
fastening clip so the wheel can click into position.
4. Pull the wheel downwards to make sure it is securely attached
to the stroller legs before using.
To Next Page
Loading...
