08
Assembly / Operating Instructions
Using four wheel steering
This unit has a reversing handle with four swivel wheels.
PLEASE NOTE: To make it easier to steer we highly recommend that only two wheels be in a
swivel motion at any time (regardless of handle position) and the correct set-up as follows:
Reversing handle
1. To reverse handle, pull up on both handle reverse levers situated
on each side of handle.
2. Reverse handle and lock it into position.
Forward facing mode
1. The swivels under the handle must be locked with the brake
lever facing the user.
2. Swivels furthest away from user are left in the unlocked position,
allowing them to swivel
WARNING: On unmade or uneven surfaces all swivels must be locked.
Reverse handle mode
1. The swivels under the handle must be locked with the brake
lever facing the user.
2. Swivels furthest away from user are left in the unlocked position,
allowing them to swivel.
Handle reverse lever
To Next Page
Loading...
