Need help?Do you have a question about the CHINT NVF5-7.5/TS4-B and is the answer not in the manual?
General| Model | NVF5-7.5/TS4-B |
|---|---|
| Rated Power | 7.5kW |
| Output Power | 7.5kW |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Operating Temperature | -10°C to +50°C |
| Relative Humidity | ≤95% (non-condensing) |
| Altitude | ≤1000 m |
Guidelines and warnings for safe inverter installation and operation.
Specific advice for users regarding inverter operation and motor compatibility.
Comprehensive technical data including input, output, and function parameters.
Procedures and requirements for installing the inverter in various configurations.
Detailed instructions for connecting power and control terminals.
How to navigate and select parameter menu modes (Simple, Custom, Engineering).
Step-by-step guide for initial inverter setup and basic operation.
Methods for setting the inverter's operating frequency reference.
Parameters related to inverter acceleration, deceleration, and stop modes.
Process for optimizing inverter performance by tuning to motor characteristics.
Flowchart for diagnosing issues and a table of fault codes and their causes.
Common operational problems and their corresponding corrective actions.
To Next Page
